Alto Professional Mixpack Collection Only Preowned
Rated 3.5/5 based on 11 customer reviews

Alto Professional Mixpack Collection Only Preowned

Available: In Stock
£379.99

Portable audio system
ALTO PROFESSIONAL MIXPACK is an all-in-one portable audio system that offers 3 distinct models for all sound diffusion needs, which require rapid commissioning. In fact, these are products that include a mixer (with Mic inputs with phantom and Line power) and an audio diffusion system complete with amplification and speakers. These systems have been designed for continuous use in different locations, therefore ideal for those situations (such as gyms, centers and conference rooms, hotels, etc.) where it is often necessary to set up the audio station in different areas based on the event that is proposed. Once the use is complete, the ALTO PROFESSIONAL MIXPACK can be closed in a single robust polypropylene chassis to facilitate its movement,
ALTO PROFESSIONAL MIXPACK is equipped with a 6-channel mixer (4 mono and two stereo) with XLR inputs (Mic with Phantom) and ¼ "Line, 3-band eq, two sends (one for the effect and one for the Aux out), pan and volume control The internal multi-effect provides a total of 256 presets (16 categories of 16 presets each) which include effects such as reverb, delay, chorus and various combinations with a 24-bit resolution.
The Main and monitor outputs are separate, with 7 band graphic eq on each. ALTO PROFESSIONAL MIXPACK is supplied complete with cables and stands for connecting and positioning satellites and with a power cable. The sound diffusion of the system is entrusted to the two satellites with 2 6.5 "drivers for the mids, a compression driver for the 1" highs and a 15 "woofer. In total, the system offers a peak power equal to 1000W, for a Max SPL of 119.5dB continuous one meter away, with frequency coverage from 45 Hz to 20kHz.

Specifications
Type: 3-way Bi-Amp with power system plus passive crossover in the satellite
Low output power: 230 watts RMS AB class
Medium-high output power: 120 W + 120 watts RMS class AB
Peak power peak: 1000 watts peak
Maximum SPL @ 1m: 119.5 dB continuous - 122.5 dB peak (calculated)
Frequency response: 45 Hz - 20 kHz @ -10 dB
Impedance: Low-Medium / High Low 4 Ohm - Medium / high 8 Ohm
Crossover frequencies: active 125 Hz at 12 dB / oct - Passive 3000 Hz at 12 dB / oct with electronic dynamic protections
Amplifier protections: Low-Mid / High Soft start - Short circuit - DC output voltage - Thermal protection - 30 Hz subsonic filter - 24 dB / Oct - Limiter / Compressor
Low frequency device: coil 15 "/ 385 mm - 2.5"
Medium frequency device: 4 × 6.5 "/ 165 mm - 1.5" Voice Coil
High frequency device: 2 × 1 "compression driver - 1" voice coil
Horn coverage: 80 ° H × 80 ° V
Container: polypropylene reinforced with plastic
Mixer section
Microphone input: electronically balanced discrete input configuration
Frequency response: 10 Hz to 55 kHz +/- 3 dB
Distortion (THD and N): 0.04% at +4 dBu 1 kHz
Gain: 35 dB
SNR (signal to noise ratio): ? 94 dB
Line input: electronically balanced
Frequency response: 10 Hz to 55 kHz +/- 3 dB
Distortion (THD and N): 0.04% at +4 dBu 1 kHz
Gain: 15 dB
Stereo input / output
Line input: unbalanced
Frequency response: 10 Hz to 55 kHz +/- 3 dB
Distortion (THD and N): 0.04% at +4 dBu 1 kHz
impedances
Microphone input: 1.4 kOhm
Channel insertion retum: 2.5 kOhm
All other inputs: 10 kOhm or higher
Tape output: 1 kOhm
All other outputs: 120 ohms
Equalizer
Hi shelving: ± 15 dB at 12 kHz
Medium bell: ± 15 dB at 2.5 kHz
Low shelving: ± 15 dB at 80 Hz
DSP section of Alesis
A / D and D / A converters: 24 bit
DSP resolution: 24 bit
Effects type: Hall, Room, Vocal & Plate Reay, Mono & Stereo Delay (max Delay Time 650ms), Chorus, Flanger & Reverb Modulation, Reverbs, Stereo Delay, Chorus, Reverb + Delay and Reverb + Chorus.
Preselections: 256
Controls: 16-position preset selector. 16-position variation selector
Controls and monitoring
Preset switch with 16 positions
Clip LED
Mute switch with LED indicator
Main Mix section
Noise (bus noise)
0 dB fader muted channels: -85dB (ref: + 4dBu)
0 dB fader all input channels assigned and set to unity gain: -81 dBr (ref: +4 dBu)
Maximum output: 27 dBu balanced
Controls: 22 dBu balanced 1/4 "jack
AUX Sends: Max out 22 dBu
Power supply: AC - 220/240 Volt or AC-100/120 Volt, with power switching mode.
dimensions
L x W x H: 1060 x 700 x 700 mm
Weight: 50.7 Kg

Portable audio system
ALTO PROFESSIONAL MIXPACK is an all-in-one portable audio system that offers 3 distinct models for all sound diffusion needs, which require rapid commissioning. In fact, these are products that include a mixer (with Mic inputs with phantom and Line power) and an audio diffusion system complete with amplification and speakers. These systems have been designed for continuous use in different locations, therefore ideal for those situations (such as gyms, centers and conference rooms, hotels, etc.) where it is often necessary to set up the audio station in different areas based on the event that is proposed. Once the use is complete, the ALTO PROFESSIONAL MIXPACK can be closed in a single robust polypropylene chassis to facilitate its movement,
ALTO PROFESSIONAL MIXPACK is equipped with a 6-channel mixer (4 mono and two stereo) with XLR inputs (Mic with Phantom) and ¼ "Line, 3-band eq, two sends (one for the effect and one for the Aux out), pan and volume control The internal multi-effect provides a total of 256 presets (16 categories of 16 presets each) which include effects such as reverb, delay, chorus and various combinations with a 24-bit resolution.
The Main and monitor outputs are separate, with 7 band graphic eq on each. ALTO PROFESSIONAL MIXPACK is supplied complete with cables and stands for connecting and positioning satellites and with a power cable. The sound diffusion of the system is entrusted to the two satellites with 2 6.5 "drivers for the mids, a compression driver for the 1" highs and a 15 "woofer. In total, the system offers a peak power equal to 1000W, for a Max SPL of 119.5dB continuous one meter away, with frequency coverage from 45 Hz to 20kHz.

Specifications
Type: 3-way Bi-Amp with power system plus passive crossover in the satellite
Low output power: 230 watts RMS AB class
Medium-high output power: 120 W + 120 watts RMS class AB
Peak power peak: 1000 watts peak
Maximum SPL @ 1m: 119.5 dB continuous - 122.5 dB peak (calculated)
Frequency response: 45 Hz - 20 kHz @ -10 dB
Impedance: Low-Medium / High Low 4 Ohm - Medium / high 8 Ohm
Crossover frequencies: active 125 Hz at 12 dB / oct - Passive 3000 Hz at 12 dB / oct with electronic dynamic protections
Amplifier protections: Low-Mid / High Soft start - Short circuit - DC output voltage - Thermal protection - 30 Hz subsonic filter - 24 dB / Oct - Limiter / Compressor
Low frequency device: coil 15 "/ 385 mm - 2.5"
Medium frequency device: 4 × 6.5 "/ 165 mm - 1.5" Voice Coil
High frequency device: 2 × 1 "compression driver - 1" voice coil
Horn coverage: 80 ° H × 80 ° V
Container: polypropylene reinforced with plastic
Mixer section
Microphone input: electronically balanced discrete input configuration
Frequency response: 10 Hz to 55 kHz +/- 3 dB
Distortion (THD and N): 0.04% at +4 dBu 1 kHz
Gain: 35 dB
SNR (signal to noise ratio): ? 94 dB
Line input: electronically balanced
Frequency response: 10 Hz to 55 kHz +/- 3 dB
Distortion (THD and N): 0.04% at +4 dBu 1 kHz
Gain: 15 dB
Stereo input / output
Line input: unbalanced
Frequency response: 10 Hz to 55 kHz +/- 3 dB
Distortion (THD and N): 0.04% at +4 dBu 1 kHz
impedances
Microphone input: 1.4 kOhm
Channel insertion retum: 2.5 kOhm
All other inputs: 10 kOhm or higher
Tape output: 1 kOhm
All other outputs: 120 ohms
Equalizer
Hi shelving: ± 15 dB at 12 kHz
Medium bell: ± 15 dB at 2.5 kHz
Low shelving: ± 15 dB at 80 Hz
DSP section of Alesis
A / D and D / A converters: 24 bit
DSP resolution: 24 bit
Effects type: Hall, Room, Vocal & Plate Reay, Mono & Stereo Delay (max Delay Time 650ms), Chorus, Flanger & Reverb Modulation, Reverbs, Stereo Delay, Chorus, Reverb + Delay and Reverb + Chorus.
Preselections: 256
Controls: 16-position preset selector. 16-position variation selector
Controls and monitoring
Preset switch with 16 positions
Clip LED
Mute switch with LED indicator
Main Mix section
Noise (bus noise)
0 dB fader muted channels: -85dB (ref: + 4dBu)
0 dB fader all input channels assigned and set to unity gain: -81 dBr (ref: +4 dBu)
Maximum output: 27 dBu balanced
Controls: 22 dBu balanced 1/4 "jack
AUX Sends: Max out 22 dBu
Power supply: AC - 220/240 Volt or AC-100/120 Volt, with power switching mode.
dimensions
L x W x H: 1060 x 700 x 700 mm
Weight: 50.7 Kg

We endeavour to get your items to you as fast and as safely as possible. 


We use a mixture of Royal Mail delivery and UPS delivery options. 

  • Orders under £50 are charged a flat £1.99 delivery fee
  • Orders over £50 are free.
  • If you want to collect an item from another store please contact us.
All of our delivery partners offer a safe delivery option. 
 
If you have any questions about deliveries please get in touch with us.